NEXT-GEN SPORT TOURING

The ventilation inlets of the all-new GT-Air 3 are positioned in the air stream, while the exhaust outlets are located at an optimal height to reduce the temperature and humidity inside the SHOEI GT-Air 3.

• Top vents wind tunnel tested for superior ventilation.
• Vent sliders and controls are easy to use even with thick gloves.
• Redesigned front vent for enhanced air circulation.
• Ventilation channels are built into the EPS liner and are integrated into the four upper head outlet openings.

Upper Air Intake
Shape of front edge and baseplate ridges air tunnel tested to improve inflow.
Top Air Outlets
Redesigned and positioned higher for increased efficiency.
Lower Air Intake
Redesigned with removable insect filter.

The all-new GT-Air 3 features distinct integrated spoiler edges, smooth transitions between the visor and the helmet shell, and a slimmed-down frontal chin area. These design elements enhance the helmet’s aerodynamic performance, reducing fatigue and noise level impact on the wearer.

• New fluid shell shape.
• Developed & tested in SHOEI‘s large in-house wind tunnel.
• Engineered for maximum noise reduction.
• Distinct integrated spoiler.

Wind resistance: 6% less than the GT-Air 2
Lift: 11% less than the GT-Air 2

*Compared to the GT-Air 2

The all-new GT-Air 3’s CNS-1C shield, with its high optical quality and large usable field of vision, allows distortion-free perception even at the edges of the field of vision. It reduces the intrusion of more than 99% of incoming UV radiation into the inside of the helmet.

• New central locking mechanism is easy to use with thick gloves.
• In closed position the seal between shield and beading has been improved
• Smoother opening and closing.
  • Center locking tab
  • Reinforced bottom rib for increased rigidity
• Improved ‘slightly open’ position increases air flow and prevents fogging.
• New QSV-2 internal sun visor is larger with 5mm more coverage for better sun protection.

• Redesigned micro ratchet made of stainless steel.
• New strap constructed of high-strength, high-elasticity, high-performance fibers.
• Width reduced from 25mm to 21mm for improved comfort.
• Easy to handle and always perfectly adjusted.
• Lever with large release angle, prevents unintentional opening.

The high-performance outer shell made of AIM (Advanced Integrated Matrix) brings together high flexibility and low weight thanks to its composition of fiberglass and organic fibers. Combined with a polystyrene core system composed of several elements of different absorption capacity, this helmet shell offers the highest possible protective function.

AIM (Advanced Integrated Matrix) outer shell provides high flexibility and low weight.
Polystyrene core system with various absorption elements offers superior protection.
EPS liner ensures excellent impact protection and energy absorption.
Features Emergency Quick Release System (E.Q.R.S) cheeck pads for easy removal in case of an accident, allowing for gentle helmet removal.

 

• SHOEI Comlink System integrates with the optional SENA SRL 3 for invisible installation.
• Aerodynamically optimized design without sacrificing safety or comfort.
• Flush controls, internal battery, and no externally mounted components.
• Fully integrated into the helmet.
• SHOEI Comlink System makes the communication system compact and easy to install.
• Rear charging port allows for simple charging on a flat surface.